BUILT FOR WHAT
HAPPENS ON PIT ROAD
Every tab in the Pit Board Racing dashboard was designed around a real problem that real racing teams face every weekend. Here's what each one does.
The Complete Race Day Setup Sheet
The digital version of the clipboard your crew chief has been carrying for 20 years — only now it never gets rained on, never gets left in the hauler, and never loses a page. The Setup Sheet covers every measurement your team needs: event information, heights and weights (unhooked and hooked), front and rear suspension geometry, shock data with static and dynamic center-to-center measurements, tires and brakes, and session notes.
- Pre-race and post-race phases tracked separately on the same sheet
- Automatic weight summary calculations — total, right-side, R-nose, and diagonal
- Static vs. dynamic shock C-to-C difference calculated automatically
- AI Scan — photograph a handwritten sheet and import the data instantly
- Extract to PDF or CSV for printing or sharing with your car owner
- Saved to the cloud the moment you type — accessible from any device at any track
4-Corner Shock Library
Log your 4-corner shock dyno data and build a searchable library of setups across every track and condition you've run. The Shock Room captures gas pressure, base valve, piston type, shaft length, and force readings at 0 and 5 in/sec for both compression and rebound on all four corners. Save each session to your Garage with a setup name, track, date, and notes — then pull it back up at the next race to compare.
- Full 4-corner data entry: LF, RF, LR, RR shocks in one view
- Force readings at 0 velocity and 5 in/sec for comp and rebound
- Gas pressure, base valve, piston type, and shaft length per corner
- Setup name, track, date, and condition notes for each saved entry
- Preview Summary before saving to review all four corners at once
- Saved entries organized in your Garage — searchable by track and date
Lap Time Logger & Analyzer
Log every lap from every session in one place and see your best lap, average lap, and drop-off calculated automatically. The built-in stopwatch lets you time laps directly from your phone at the track, or you can enter times manually. Multiple sessions per event are supported — create Session 1, Session 2, and so on to track changes between practice runs. The AI Scan feature lets you photograph a Race Monitor screen and automatically import all the lap times.
- Built-in stopwatch for real-time lap timing at the track
- Best lap, average lap, and drop-off calculated automatically
- Multiple sessions per event — track changes between practice runs
- AI Scan — photograph a Race Monitor screen to import times automatically
- Lap time progression chart shows trends across the session
- Export all sessions as CSV for post-race analysis
Load Machine Data Logger
Stop writing load machine data on a whiteboard that gets erased before the next race. The Load Machine module captures bump stop loads and static and dynamic shock settings for all four corners, organized by run number within a session. Static vs. dynamic difference is calculated automatically so you can see exactly how much the car is moving at speed. Save sessions to your Garage with track, date, car number, and driver, then load them back at any time.
- Bump stop loads — load and eye-to-eye for LF and RF
- Static shock settings — load and eye-to-eye for all four corners
- Dynamic shock settings — load and eye-to-eye for all four corners
- Multiple runs per session — add runs as you work through the car
- Handling notes field per run for driver feedback and changes made
- Static vs. dynamic difference calculated automatically per corner
Tire Temperature & Stagger
Log 3-point pyrometer readings for all four corners and see average temperature, spread, and stagger calculated automatically. The color-coded temperature guide (Cold, Ideal, Warm, Hot) gives you an instant visual read on where each tire is running. The Stagger Calculator computes front and rear stagger from your tire circumferences. The AI Tire Scan lets you photograph your pyrometer display and automatically fill in all four corners.
- 3-point pyrometer readings for LF, RF, LR, RR — inner, middle, outer
- Average temperature and spread calculated automatically per corner
- Color-coded temp guide: Cold (<165°F), Ideal (165–195°F), Warm (195–220°F), Hot (>220°F)
- Stagger Calculator — enter tire circumferences to compute front and rear stagger
- AI Tire Scan — photograph your pyrometer to auto-fill all four corners
- Save to Garage with track, date, run number, and current weather conditions
Weather & Conditions Logger
Log ambient temperature, track temperature, humidity, barometric pressure, and wind speed for every session. Density altitude is calculated automatically from your inputs — no manual formula needed. Tap Use My Location to auto-fill current conditions from your GPS position. Save every log to your Garage so you can pull up the conditions from last year's race at this track before you even unload the car.
- Ambient temp, track temp, humidity, baro pressure, and wind speed
- Density altitude calculated automatically from your inputs
- Use My Location — auto-fill live conditions from your GPS position
- Condition notes field for track surface, rubber buildup, and grip observations
- Multiple logs per session — track how conditions change throughout the day
- Saved to Garage by track and date — searchable across your full history
AI Setup Buddy — Live
Ask your AI Setup Buddy anything about asphalt late model chassis setup and get a specific, actionable answer in plain English — not a generic response. The AI is trained on late model setup knowledge and understands the terminology: bump stops, panhard bar height, cross weight, Ackerman, caster, pinion angle. It's available 24/7, even at 11pm the night before a race when your crew chief isn't answering texts.
- Handling problems — tight, loose, brake hop, push in center, loose off
- Suspension geometry — camber, caster, toe, panhard bar, bumpsteer
- Spring and shock selection — rates, valving, bump stop gaps
- Tire temp and pressure analysis — what the numbers are telling you
- Weight distribution and cross weight — how to dial in your balance
- Track-specific recommendations — what to expect at different track sizes
AI Video Analysis
Upload race footage or paste a YouTube URL and let the AI break down your car's handling characteristics from the video. The AI identifies tight and loose conditions, entry/center/exit behavior, driver input patterns, and mechanical issues — giving you a written analysis you can share with your crew and reference when making setup changes. Choose from preset analysis types or write a custom prompt to focus on exactly what you want to know.
- Paste any YouTube URL or upload a direct MP4/WebM video file
- Preset analysis types: Handling, Suspension, Driver Inputs, Mechanical, Full Race
- Custom prompt — describe exactly what you want the AI to look for
- Written analysis with specific observations about entry, center, and exit
- Save analyses to your Garage linked to the setup from that session
- Available on Crew Chief ($24/mo) and Race Team ($49/mo) plans
EVERY TOOL. ONE APP.
The Basic plan is free forever and includes all core tools — Setup Sheet, Shock Room, Load Machine, Tire Tools, Lap Times, Weather, and Notes. No credit card required to start.